How to set the timer
- Enter Hours, Minutes and Seconds, or tap a preset: 1 min, 5 min, 10 min or 30 min. The timer starts at 5 minutes by default.
- Press Start. The input boxes hide and the countdown shows in large digits.
- Press Pause to stop it, then Resume to carry on from the same point.
- When it reaches 00:00, you hear three short beeps and see a green "Time's up!" message.
- Press Reset to go back to your original time.
Times under one hour show as minutes and seconds (MM:SS). Longer times show hours as well (HH:MM:SS). The progress bar starts full and shrinks as time runs out.
Common timer lengths
Minutes and seconds only go up to 59, so longer times need the hours box. Here is how to enter some popular durations:
| Use | Hours | Minutes | Seconds | Total seconds |
|---|---|---|---|---|
| Quick break or plank | 0 | 1 | 0 | 60 |
| Steeping tea | 0 | 4 | 0 | 240 |
| Short meeting or talk | 0 | 10 | 0 | 600 |
| Focus session | 0 | 25 | 0 | 1,500 |
| Movie or exam block | 1 | 30 | 0 | 5,400 |
| Slow cooking step | 2 | 0 | 0 | 7,200 |
A common mistake is typing 90 into the minutes box for a 90 minute timer. The box tops out at 59, so enter 1 hour and 30 minutes instead.
Why the timer stays accurate
Some simple web timers subtract one second at a time. Those can fall behind, because browsers slow down page code that is not on screen. This timer works differently. When you press Start, it records the exact clock time the countdown should end. Every time it updates the screen, it compares the current time with that end time.
This means the time shown is correct even if the page was hidden for a while. When you pause, it saves the time left. When you resume, it sets a new end time from that point.
Making sure you hear the alarm
The alarm is timed separately from the on-screen digits, and the timer checks again when you return to the tab. So the beeps play on time even when this tab is in the background or another window is on top. Sound is set up the moment you press Start, which is what browsers, including Safari on iPhone and iPad, need before a page can play audio.
- Turn up your device volume and make sure the tab is not muted.
- On a phone, keep the screen on. A locked phone can pause the browser until you unlock it.
- Do not close or refresh the tab. That stops the timer and does not save it.
- The beep plays once. It does not repeat, so stay within earshot.
Counting down to a date instead
This tool counts down a length of time, not a calendar date. To find how many days are left until a holiday, birthday or deadline, use the Date Difference Calculator. For example, from December 1 to December 25 is 24 days, and from December 25 to January 1 is 7 days.
To measure how long something takes rather than count down, use the Stopwatch. For repeating work and break cycles, the Pomodoro Timer is a better fit.
Common Mistakes to Avoid
Putting more than 59 in the minutes box
Solution:
Muting the tab or the device
Solution:
Refreshing or closing the page
Solution:
Expecting to count down to a date
Solution:

